Lockwell Passive Fire Protection system includes wide range of high performance products ranging from Fire Rated Cable Coating, Firestop Mortar,  Firestop Sealant and Fire Resistant Surface Coating all specifically fire rated and internationally approved.

 Lockwell FRC – Cable Fire Rated Coating

Lockwell FRC is an acrylic based intumescent coating designed to increase the fire resistance of fire seals and protect cables, cable trays and metal pipes.

FEATURES:

  • High Performance, Thin Film Fire Resistant Coating
  • Available either in a White base or in a Range of Colours
  • Can be used in Exterior applications with protective top coat
  • Non-toxic, Emission free, Zero% volatile organic compounds (VOCs)
  • Durable, Robust and designed to Last
  • Achieve Excellent Coverage with a spray applied Thin Coat system (the most cost effective option)
  • Suitable for most surfaces, including Rubber, Plastics, Concrete, Bricks, Masonry, Primed Steel, Wood, Gypsum and most Non-Porous Surfaces, in most cases Without a Primer
  • Resistant to Oil, Various Chemicals and Petrol Spills
  • Halogen free with added preservatives that Resist Bacterial and Fungal Growth, providing Extra Protection to Health in addition to the Nonharmful Emissions. The product also Protects the Underlying Substrates.

Lockwell Firestop Coating

Lockwell Firestop Coating spray grade, is an ablative sealant coating designed to enhance, seal and fire protect mineral fibres. It is based on a durable polymer system with inert fillers, non-halogenated fire retardants and a preservative to resist microbial attack.

FEATURES:

  • The Coating applied on Mineral Fibres is Classified for All Types of Constructions With or Without Building Service Penetrations.
  • Simple and Very Quick to Install.
  • Easy to Retrofit Additional Building Services after installation.
  • Permanently Flexible – will accommodate movements during fire and Smaller Movements in the construction it has been fitted within.
  • Suitable for most surfaces, including Concrete, Bricks, Masonry, Steel, Wood, Gypsum, Glass, Plastics and most Non-Porous Surfaces.
  • May be used in Unlimited Lengths in Walls with heights up to 1200 mm and in Floors with widths up to 120 mm.
  • May be installed in Gypsum walls Without Framing around the opening.
  • Halogen Free with added Fungicides.
  • Once fully cured, the coated board resists water and frost.
  • The fire performance specification of the coating has been derived when the seal has been let to cure for a month.